This Apex Customs Correction Kit contains:
The Grasshopper 2.0 completes our range of Dual Action Random Orbital polishers and is an absolutely essential bit of kit for any detailer.
With its 12mm orbit and 3” backing pad, the Grasshopper gets into the tight areas where the larger dual action polishers simply cannot get to. Think door jams, sills, tricky lips and lids. Boasting a new rubberised grip, increased ventilation ports for improved heat dissipation and NSK bearings all round, the Grasshopper 2.0 was made for excellent ergonomics over prolonged use.
Combine this with a set of our German Foam 3” pads and a cutting, polishing and finishing polish to tackle any job at hand.
KEY FEATURES:
KIT INCLUSIONS:
CLARITY SERIES
MEDIUM - Polishing/one step compound
Removes P2000 sanding marks and finer
Perfect for:
Instructions: Work on a cool surface in shade. Shake well. Always work in a 40cm x 40cm area.
Application: Apply 2-3 pea sized drops to a polishing pad. Start on a low-speed setting with the polisher to prime the pad and surface. Dial the speed up and guide the polisher on the surface and allow the weight of the polisher and compound to do the work. Work area in 3-4 passes until compound becomes clear. Remove residue with a clean microfibre cloth.
Tips:
FINE - Fine finishing compound
Perfect for:
Instructions: Work on a cool surface in shade. Shake well. Always work in a 40cm x 40cm area.
Application: Apply 2-3 pea sized drops to a finishing pad. Start on a low-speed setting with the polisher to prime the pad and surface. Dial the speed up and guide the polisher on the surface and allow the weight of the polisher and compound to do the work. Work area in 3-4 passes until compound becomes clear. Remove residue with a clean microfibre cloth.
Tips:
P/N | ACGRSHPR2.0CCK |
Brand | Apex Customs |
Type | Dual Action Random Orbital |
Orbit Size | 12mm |
Min Backing Plate Size | 75mm |
Max Backing Plate Size | 75mm |
Weight | 2kg |
Input Power | 600W |
R.P.M. | 2000-6000 |
Warranty | 12 months |
Cord Length | 5m |
Backing Plate Thread | M8 |
Speed Control | Yes |
Application | Cutting, Polishing, Finishing |